Business Products Business Products. Find The Perfect Camera. View All Video Cameras. Find The Perfect Lens. View Latest Printers. Find The Perfect Printer. View All Services. View All Products. View All Business Products. Services Services. Apps Apps. View All Apps. View All Business Services. Stories Stories. View All Articles. Contact Support Contact Support. View All Downloads. Full-frame High dynamic range imaging Preserve detail in highlight and shadow areas with in-camera HDR image creation. Great quality sound Give your video footage the soundtrack it deserves.
In-camera editing functions Begin your digital editing workflow before you arrive back home. Built to go anywhere A magnesium chassis provides strength and durability without adding weight. Ensures correctly exposured images in all lighting conditions. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. A blinking battery icon b indicates that the battery will be exhausted soon.
Follow steps 3 to 6 to set the current date, time, and time zone. If you do not see your time zone, set the time zone while referring to the difference with UTC. Under the  tab, select [LanguageK]. The camera cannot be used with EF-S lenses. Do not look at the sun directly through any lens. Doing so may cause loss of vision. If the front part focusing ring of the lens rotates during autofocusing, do not touch the rotating part.
When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it. About Zooming Detaching the Lens To zoom, turn the zoom ring on the lens Before storing the lens in a bag, etc. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. You can press the shutter button halfway. Then you can further press the shutter button completely.
Preventing Camera Shake Hand-held camera movement during the moment of exposure is called camera shake. It can cause blurred pictures. Turn the dial while holding down the lock release button at the center of the dial. R Multi function Lock With [ Multi function lock] set p. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. This is called the Quick Control screen. Picture Style p. Except [ Erase images] and [ Format card].
Page Before You Start Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed p.
If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons. Beep Enable Release shutter Enable without card Image review 2 sec. With this same procedure, you can display the electronic level during Live View shooting and before shooting a movie p.
If the Feature guide fills two or more screens, a scroll bar will appear on the right edge.
Canon EOS 5D Mark III Instruction Manual
Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed. The camera analyzes the scene and sets the optimum settings automatically. Detecting whether the subject is still or moving, it also adjusts focus automatically. Page 66 The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake.
Using a tripod or a Canon EX-series Speedlite p. When flash was used, the bottom part of the picture came out unnaturally dark. For details, see page If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. You can select the AF point s suiting the scene or subject. Depending on the lens attached to the camera, the number of usable AF points and AF point patterns will differ. Effective for pinpoint focusing of overlapping subjects such as an animal in a cage.
Since Spot AF covers a very small area, focusing may be difficult during hand-held shooting or for a moving subject. Effective when it is difficult to track a moving subject with just one AF point. If multiple AF points are displayed, it means they all have achieved focus. The illustration below shows the AF sensor pattern corresponding to each AF point. Depending on the lens attached to the camera, the number of usable AF points and AF pattern will differ. Some lenses may not be available in certain countries or regions. Group B Autofocusing with 61 points is possible.
All of the AF area selection modes are selectable. Not possible with all 61 AF points. Tracking sensitivity, 2. AF pt auto switching as desired. Set this if you do not want the AF assist to be emitted as small flashes. Page 98 3 Customizing AF FunctionsN Lens drive when AF impossible If focus cannot be achieved with autofocus, you can have the camera keep searching for the correct focus or have it stop searching. Super telephoto lenses can become grossly out of focus during continuous focus search, taking more time to achieve focus the next time. Page 99 : 15 points Fifteen major AF points will be manually selectable.
With a lens from groups F to H p. Even with settings other than [61 points], AF point expansion Manual selection , AF point expansion Manual selection, surrounding points , If the attached lens belongs to group H p. Page Orientation linked AF point You can set the AF area selection mode and manually-selected AF point separately for vertical shooting and horizontal shooting.
Horizontal, 2. Vertical with the camera grip at the top, 3. VF display illumination The AF points and grid in the viewfinder can be illuminated in red when focus is achieved. Page If [All by same amount] is selected, AF adjustment will not be possible for the wide-angle and telephoto ends of zoom lenses. You can register the adjustment for up to 40 lenses. When you autofocus with a lens whose adjustment has been registered, the point of focus will always be shifted by the adjustment amount.
Even if only the wide-angle or telephoto end has been adjusted, a correction will be made automatically for the intermediate range. Subjects in very low light Extremely backlit or reflective subjects Example: Car with a highly reflective body, etc. Near and far subjects covered by an AF point While you hold down the shutter button completely, shots will be taken continuously.
When the battery level is low, the continuous shooting speed may become slightly slower. Page j Using the Self-timer If you will not look through the viewfinder when you press the shutter button, attach the eyepiece cover p. If stray light enters the viewfinder when the picture is taken, it may throw off the exposure. Page Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, lens peripheral illumination correction, chromatic aberration correction, and other functions. When only one card is inserted, the procedures described on pages to are not necessary.
If you insert both a CF card and SD card, you can select the recording method and select which card to use for recording and playing back images. Auto switch card Same as with the [Standard] setting, but if the card becomes full, the camera will automatically switch to the other card to record images.
When the camera switches to the other card, a new folder will be created automatically. If [Record func. There are eight JPEG image-recording quality settings: 73, 83, 74, 84, 7a, 8a, b, c. There are three RAW image quality settings: 1, 41, 61 p. The number of possible shots will be displayed up to on the LCD panel.
Page 7 Fine quality. These figures will vary depending on the subject, card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and other settings. The two images will be recorded with the same file numbers file extension. CR2 for RAW. Regarding the ISO speed during movie shooting, see pages and If you use a high ISO speed and flash to shoot a close subject, overexposure may result.
Select [ISO speed settings]. You can set the minimum limit within ISO - , and the maximum limit within ISO - in whole-stop increments. You can also select the Picture Style with [z3: Picture Style]. The colors will look vivid, especially for blue skies, greenery, and sunsets in nature, outdoor, and sunset scenes. P Standard The image looks vivid, sharp, and crisp. Page V Monochrome Creates black-and-white images. Black-and-white images shot in JPEG cannot be reverted to color.
If you want to later shoot pictures in color, make sure the [Monochrome] setting has been canceled. To see the resulting effects, take test shots. To customize [Monochrome], see page Select [A]. To use the adjusted Picture Style, first select the adjusted Picture Style, then shoot. The blue sky will look more natural, and the white clouds will look Ye: Yellow crisper. You can create Picture Styles whose parameter settings such as sharpness and contrast are different.
If you execute [Clear all camera settings] p. Do this procedure under the actual light source to be used.
Spot metering circle Photograph a white object. Page P Setting The Color Temperature If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: images captured while the Picture Style was set to [Monochrome], multiple-exposure images, and images taken with another camera.
This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users who are familiar with using color temperature conversion or color compensating filters.
Page White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Page Correcting The Brightness And Contrast Automatically auto Lighting Optimizer Correcting the Brightness and Contrast AutomaticallyN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically.
This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. At low ISO speeds, the noise in the shadow areas is further reduced. This [Auto] setting is effective in most cases. Page 3 Noise Reduction SettingsN With [Auto] and [Enable], after the picture is taken, the noise reduction process may take the same amount of time as the exposure. With [Enable], the Auto Lighting Optimizer p. When [Highlight tone priority] is set to [Disable], the Auto Lighting Optimizer will revert to its original setting.
Color fringing along subject outlines also is a chromatic aberration.
Search Support For Your Product
Light fall-off and color fringing can be corrected. The default setting is [Enable] for both corrections. Peripheral Illumination Correction Depending on shooting conditions, noise may appear on the image periphery. Check the chromatic aberration correction with Digital Photo Professional provided software, p. When using a non-Canon lens, setting the corrections to [Disable] is recommended, even if [Correction data available] is displayed.
If you use the magnified view during Live View shooting, the peripheral illumination correction and chromatic aberration correction will not be reflected in the image. This is optional since a folder will be created automatically for saving captured images.
A folder can contain up to images file number - The first four alphanumeric characters are set upon factory shipment and unique to the camera. However, you can change them. The captured images are assigned a sequential file number from to and saved in one folder. You can change how the file number is assigned. Continuous Continues the file numbering sequence even after the card is replaced or a new folder is created.
Page Manual Reset Auto Reset The file numbering restarts from each time the card is replaced or a new folder is created. Select [Copyright information]. Select the option to be set. Page Checking the Copyright Information Deleting the Copyright Information When you select [Delete copyright information] in step 2 on the preceding page, you can delete the [Author] and [Copyright] information.
You can also set or check the copyright information with EOS Utility provided software, p. For normal shooting, sRGB is recommended. After you press the shutter button halfway and let go, the exposure values will remain displayed in the viewfinder and on the LCD panel for 4 sec. This is called Program AE. Focus the subject. Look through the viewfinder and aim the AF point over the subject. Increase the ISO speed or use flash. Lower the ISO speed or use an ND filter sold separately to reduce the amount of light entering the lens. Page S: Shutter-priority Ae s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure suiting the brightness of the subject.
This is called shutter-priority AE. A faster shutter speed can freeze the action or a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. Page If the maximum aperture blinks, it indicates underexposure. If the minimum aperture blinks, it indicates overexposure. Page F: Aperture-priority Ae f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure suiting the subject brightness.
This is called aperture-priority AE. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. After recomposing the picture, you can see the exposure level difference on the exposure level indicator p. Page q Selecting the Metering ModeN This is for metering a specific spot of the subject or scene.
The metering is weighted at the center covering approx. The metering is weighted at the center and then averaged for the entire scene. Page Setting Exposure Compensation Setting Exposure CompensationN Exposure compensation can brighten increased exposure or darken decreased exposure the standard exposure set by the camera.
This is called AEB. Page F: Bulb Exposures F: Bulb Exposures When bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures standard exposure, underexposure, and overexposure are captured for each shot and then merged together automatically.
Art standard While the highlight and shadow detail will be better preserved than with [Natural], the contrast will be lower and the gradation flatter to have the picture look like a painting. For handheld shooting, using a fast shutter speed is recommended. HDR shooting of a moving subject is not recommended because the movement of the subject will appear as afterimages in the merged image. Based on the [No. Refer to the basic guide below to set a negative exposure compensation.
Page Remaining number of exposures During multiple-exposure shooting, Auto Lighting Optimizer, highlight tone priority, peripheral illumination correction and chromatic aberration correction will be disabled. With Live View shooting, the multiple-exposure images merged so far will be displayed.
- Alien Biz - Jozeph Picasso Alien Trilogy - Filmmaking Adventures Book Act 2!
- The Trojan Horse Conspiracy: The Infiltration and Destruction of American Democracy!
- To the Fourth Generation;
- 5 Lightweight Mirrorless Cameras That Make Perfect Travel Companions.
- Shop by category.
- Canon 5D Mark III Essential Training.
- TQM: Introduction to and Overview of Total Quality Management;
After you shoot the set number of exposures, multiple-exposure shooting will be canceled. Page File No. Merging multiple exposures with an image recorded in the card You can select an image recorded in the card as the first single exposure. The original of the selected image will remain intact. You can only select 1 images. Page P Multiple ExposuresN You can also select a 1 multiple-exposure image as the first single exposure. If you select [Deselect img], the selected image will be canceled. Page Are there any restrictions on the image-recording quality? All JPEG image-recording quality settings can be selected.
To access Lynda.com courses again, please join LinkedIn Learning
If 41 or 61 is set, the merged multiple-exposure will be a 1 image. With [Select image for multi. Page Mirror Lockup 2 Mirror LockupN Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations mirror shock can also help when you use a super telephoto lens or shoot close ups macro photography. Set [Mirror lockup] to [Enable]. Page Using The Eyepiece Cover Using the Eyepiece Cover When you use the self-timer or shoot bulb exposures and do not look through the viewfinder, stray light entering the viewfinder can cause the image to come out dark.
To prevent this, use the eyepiece cover p. You can either shoot immediately or use a 2-sec. Remote control sensor The flash will not fire if it is set to [Mode 1] or [Mode 2]. Page D Flash Photography If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result. Attach the Speedlite to the camera and turn on the Speedlite. Page 3 Setting the FlashN [Flash sync. High-speed sync is also possible.
Page [Flash function settings] On the screen, the settable functions and the display will differ depending on the Speedlite, current flash mode, flash Custom Function settings, etc. Sample display Flash mode Shutter synchronization Page 3 Setting the FlashN Wireless functions Flash zoom Flash coverage Shutter synchronization If [Second-curtain synchronization] is set, the flash will fire right before the shutter closes.
When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night. By selecting [Clear flash settings], you can revert the flash settings to their defaults. Fn Distance indicator display]. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
The metering mode will be fixed to evaluative metering for Live View shooting. Page Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc. During shooting, the Live View image will automatically reflect the function settings listed below. AF mode You can select [Live mode] p. Grid display By displaying a [3x3 l] or [6x4 m] grid, you can check for any picture tilting. The area surrounding the Live View image is masked in black when the following aspect ratios are set:   .
JPEG images will be saved with the set aspect ratio. Page For asterisked image-recording quality, the pixel count does not exactly match the set aspect ratio. The image area displayed for the asterisked aspect ratio is slightly larger than the recorded area. Check the captured images on the LCD monitor when shooting. If you use a different camera to directly print images shot with this camera in the aspect ratio, the images may not be correctly printed.
Page If you use flash, silent shooting will not be possible regardless of the [Silent LV shoot. When using a non-Canon flash unit, set it to [Disable]. Live Mode: d The image sensor is used to focus. Have the target person face the camera. Aim the AF point over the subject and press the shutter button halfway.
Page Focusing If the focus is far off, face detection will not be possible. Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. Page Shooting conditions that can make focusing difficult Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction.
Under a light source whose brightness, color, or pattern keeps changing. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation.
[PDF] Canon 5D Mark III: User Guide (Quick and Easy Guides) Popular Collection - video dailymotion
Page You cannot take a picture during autofocusing. Take the picture while the Live View image is displayed. Select the AF point. Page Focusing Manually Focusing Manually You can magnify the image and focus precisely with manual focus. Turn the lens focusing ring to focus roughly. Move the magnifying frame. Shooting in high temperatures may cause noise and irregular colors in the image.
If the light source within the image changes, the screen may flicker. If this happens, stop the Live View shooting and resume shooting under the actual light source to be used. Compression Method p. Exposure control will be the same for the three shooting modes. Recording movie Microphone Regarding the cautions for movie shooting, see page The ISO speed and aperture will be set automatically to suit the brightness and obtain a standard exposure. Shutter speed Changing the shutter speed during movie shooting is not recommended since the changes in the exposure will be recorded.
The ISO speed and shutter speed will be set automatically to suit the brightness and obtain a standard exposure. Aperture Changing the aperture during movie shooting is not recommended since variations in the exposure, due to the drive of the lens aperture, will be recorded. Under [z2: ISO speed settings] p.
Using manual exposure to shoot movies is for advanced users. Autofocusing during movie shooting may momentarily throw the focus far off or change the exposure. During movie shooting, do not point the lens toward the sun. Page Notes on Movie Shooting By connecting stereo headphones commercially available equipped with a 3. You can use Remote Controller RC-6 sold separately, p. Page Shooting Still Photos k Shooting Movies Shooting Still Photos Taking still photos during movie shooting If you take a still photo during movie shooting, the movie will record a still moment lasting approx.
The captured still photo will be recorded to the card, and the movie shooting will resume automatically when the Live View image is displayed. Even if an external Speedlite is used, it will not fire. Continuous still photo shooting is possible during movie shooting. However, the captured images will not be displayed on the screen.